- Benefits
- Maximum energy efficiency due to EC fan technology and IT-based control
- Minimal pressure loss at the air end, which in turn minimises the power consumption of the fans
- Temperature monitoring and control
- With redundant temperature sensor integrated at the air end as standard
- Thanks to the speed-regulated compressor, the cooling output is ideally adapted to actual requirements
- Specific maintenance of the LCP DX due to separation of cooling and server racks
- Using LCP DX/FC variants in combination with indirect free cooling helps to save operating costs
- Applications
- Ideal for IT cooling of small and medium-sized locations
- One or two racks can be cooled separately
- Function principle
- The LCP is designed for siting within a bayed enclosure suite. Hot air is drawn in from the aisle at the rear of the device, cooled by the high-capacity compact impellers, and blown back into the room or cold aisle after cooling.
- The LCP DX/FC variants include both a refrigerant and a water/glycol heat exchanger. There is an additional free cooler integrated into the external condenser.
- Absorbed thermal energy is emitted to the ambient air at the external condenser location, without heating up the installation room
- IT monitoring
- Direct connection of the unit via SNMP over Ethernet
- Integration into RiZone
- Material
- Sheet steel, spray-finished
- Colour
- RAL 7035
- Note
- Variant with UL approval available on request
- Options
- Humidifier
- Dehumidification and reheater
- Condensate drain pump
- Higher cooling output
- Air filter
- Low-temperature/high-temperature condenser (-40 °C/+53 °C)
- Variant
- Suite cooling
- Total cooling output to DIN EN 14511
- L 30 L 22: 35 kW
- Modulation range
- Device modulates without interruption in the cooling output range between: 8 kW - 35 kW
- Total cooling output/Number of fan modules
- 35 kW / 3
-
-
- Total cooling output
- 35 kW
- Air throughput (unimpeded air flow)
- At 50 Hz: 9,900 m³/h
- Rated operating voltage
- 400 V, 3~, 50 Hz
- 380 V - 480 V, 3~, 60 Hz
- Dimensions
- Width: 600 mm
- Height: 2,000 mm
- Depth: 1,200 mm
- To fit
- TS IT
- Installation in bayed enclosure suite
- Flush
- Temperature range
- Operation (environment): +15 °C...+35 °C
- Refrigerant/cooling medium
- Refrigerant: R410a
- Cooling medium: Water/glycol
- Type of electrical connection
- Connection clamp
- Duty cycle
- 100 %
- Rated current max.
- At 50 Hz: 31.6 A
- Miniature circuit-breaker/fuse
- 40
- Noise level
- At 50 Hz: 69 dB(A)
- Design
- LCP Inline DX/FC
- EC fan
- yes
- Fans may be exchanged with the system operational
- yes
- eCl@ss 8.0/8.1
- 27180712
- Packs of
- 1 pc(s)
- Weight/pack
- 398 kg
- EAN
- 4028177691384
- Customs tariff number
- 84158200
- –
- ETIM 7.0
- EC002515
- ETIM 6.0
- EC002515
- eCl@ss 8.0/8.1
- 27180712
- eCl@ss 6.0/6.1
- 27180712
- Product description
- Hybrid split (cooland/water) for row cooling, Mounted on the side of the rack, flush, Cooling of several racks,, Support of IT-compatible, #front-to-back# air routing,, Also required:
